This Fort Lauderdale install was a Samsung Frame TV set up to read as a framed piece of art, not a television — which is a different job than mounting a standard flat-screen, with a soundbar and subwoofer wired in alongside it in an oceanfront high-rise living room.
Why a Frame TV needs a different mount entirely
A standard flat-screen mount holds the TV an inch or more off the wall to clear the bracket hardware and leave room for cables at the back — fine for a normal television, but it defeats the entire point of a Frame TV, which is designed to sit flush against the wall like an actual framed print. Samsung's no-gap mount is built specifically to close that distance, holding the panel close enough to the wall that the shadow gap disappears and the illusion holds up from across the room, not just head-on.
The One Connect Box has to live somewhere
Frame TVs don't take cables directly — inputs, power, and processing all run through a separate unit called the One Connect Box, connected to the panel by a single thin fiber-optic cable rather than a bundle of HDMI and power cords. That box still needs a home, and it's usually tucked into the console or media cabinet below rather than left sitting in the open, with just that one slim cable running up the wall to the TV — which is most of what makes the flush, cable-free look actually achievable.
Soundbar and subwoofer, wired without competing for the same run
With a soundbar on the console and a separate subwoofer routed nearby, this setup has three signal points to account for — TV, soundbar, and sub — instead of the usual two. We plan the console-side wiring so the soundbar's connection and the subwoofer's power don't end up crowding a single outlet or fighting for the same low-voltage path the One Connect Box already needs.
Checking the wall before committing to hardware
High-rise interior walls can be metal-stud drywall, poured concrete, or drywall built out over a concrete shell depending on the building and which wall you're on — and nothing about a clean paint finish tells you which one you're looking at. We probe before drilling on every job rather than assume the wall matches the finish, and select anchors for what we actually find, not what a wall this clean-looking usually turns out to be elsewhere.
The result: a Frame TV sitting flush against the wall with no visible mounting gap, its One Connect Box out of sight in the console, and a soundbar-and-subwoofer setup wired in without any of the three fighting each other for cable space.
Planning a Samsung Frame TV installation or a full soundbar setup in Fort Lauderdale or anywhere in South Florida? Hero TV Mount installs Frame TVs the way they're meant to look — call or text (754) 340-1000 to schedule.
